- Make sure this fits by entering your model number.
- Powerful 13.5 AMP motor; 1,250-2,750 BPM to handle the most demanding jobs
- Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
- Soft start suppresses start-up reaction for more control and better accuracy
- Variable speed control dial enables user to match the speed to the application for greater versatility
- L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- L.E.D. power lights indicate switch failure or cord damage
- 2-mode operation for “”Hammering Only”” or “”Hammering with Rotation”” for multiple applications
- Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
- Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts resulting in up to 50% faster drilling
- Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
- Extended life brushes are longer for more work between service intervals and less downtime
- 16 bit angle settings allow the bit to be set at different positions for operating convenience
- Automatic brush cut-off protects commutator from damage for longer tool life
- Lock-on slide switch for continuous operation (“”Hammering Only”” mode)
- One-touch sliding chuck for quick bit changes
- Rubberized ergonomic soft grip provides more comfort and control
- Accepts SDS-MAX bits
- Side Handle (151769-0)
- D-Handle (417003-1)
- Depth Gauge (321248-4)
- Bit Grease (194683-7)
- Tool Case
- HR4013C
- HR2621
- HR2611F
- HR2811FX
- HR2475X2
- HR2475
- HR3210C
- HR2811F
- HR2470F
- HR4002
- HR5210C
- HR4041C
- HR1830F
- HR4001C
- HR4010C
- HR2432
- HR5000
- Makita’s Anti-Vibration Technology incorporates a counterbalance system that reduces vibration for unmatched comfort
- Powerful 13.5 AMP motor; 1,250-2,750 BPM to handle the most demanding jobs
- Built-in Torque Limiter ensures stable torque control
- L.E.D. power light indicates switch failure or cord breakage; L.E.D. service light indicates carbon brushes need to be replaced.
- 1 year warranty
Show more
Product description
Makita HR4510C 1-3/4-Inch 13.5 Amp 1,250-2,750 Bpm Corded AVT Rotary Hammer
From the Manufacturer
Powerful 13.5 AMP motor; 1,250-2,750 BPM to handle the most demanding jobs 2-mode operation “hammering with rotation and hammering only” for multiple applications Electronic variable speed control allows user to set the speed based on the application Extended service life of carbon brushes is greater than twice that of competitive models One touch sliding chuck for easy bit installation and removal Built-in torque limiter ensures stable torque control