M18 Fuel 1/2″ Hammer Drill/Driver Kit. The Product is Easy to Use and Easy to Handle. The Product is Highly Durable. Made In China.
18V Compact Lithium-Ion Cordless 1/2″ Driver-Drill Kit, Single Battery.The LXFD01SPW1 features a Makita-built four-pole motor that delivers 480 inch-pounds of max torque and 290 inch-pounds PTI Torque, with an all-metal two-speed transmission (0-400/0-1,500 rpm) to cover a wide range of drilling and driving applications. At only 7-9/16 inches long and 3.3 pounds, the LXFD01SPW1 has a compact and ergonomic design for reduced operator fatigue and a new rubberized soft grip for increased comfort on the job. The built-in LED light illuminates the job area for applications in low-light conditions and close quarters. Comes with single battery.
M28 1/2 RAD DRILL. The product is easy to use. The product is durable. The product is manufactured in China.
The Milwaukee 0721 is powered by a 28 Volt Milwaukee high power motor. This Cordless Right-Angle Drill is ideal for boring large holes in between studs, joists or in tight areas. This tool is great for plumbing and electrical applications such as drilling holes to run wire through studs and joists, or boring holes in floors for plumbing venting. The tool features an extremely rugged motor and gear train that is capable of handling some of the toughest jobs and is durable enough to withstand job-site abuse. This monster has a 2-9/16 in. capacity when drilling 2x material with a self-feed bit. It also has a head and handle that can swivel 360 degrees and be locked tight into any position. The 0721 has a variable speed trigger that allows for controlled starts and features a convenient forward/reverse lever for easy use. This is a tool only and includes a side handle.
Rockwell RK2853K2 Li-ion Brushless Hammer Drill, 20V
Item Type: 3/8″ Air Drill – Angle Head Reversible
Description:
3/8″ Air Drill – Angle Head Reversible (Industrial Grade)
Compact And Lightweight Design For Easy Operation In Confined Areas
Variable Speed Lever Throttle For Precision And Complete Speed Control
Rear Handle Exhaust Keeps Air Away From Work Surface
Forward/Reverse Control Locks In Both Positions For Convenient Application
Drill Capacity……………………………….3/8″
Free Speed (Rpm)……………………1,400
AvgAir Consumption (Cfm)……………..4
Air Pressure (Psi)…………………………..90
Air Inlet (Npt)……………………………..1/4″
Hose Size (Id)…………………………….3/8″
Warranty: Coverd by Manufacture’s Warranty
Box Dimension: 8.27 x 1.57 x 3.94 inch.
Box Weight: 2.64 lbs.
Ampro’s 3/8″ Dr. Angel Head reversible Air Drill is lightweight for fatigue free handling. It features variable speed lever throttle and compact design for close clearance operation adds precision for all applications.
Includes tool, 13 ft supply cord, side handle, Hilti grease, cleaning cloth, and operating instructions in an impact-resistant plastic tool box. The Hilti TE 50 Deluxe 1-3/4 in. Combo Hammer is durably made from robust components and features a powerful 9.1 amp, 1,050-watt motor that drives up to 3,180 BPM and 550 RPM, making it ideal for drilling and moderate chiseling in a number of materials. This hammer drill cools efficiently and has a high power-to-weight ratio to help increase job-site productivity. The tool’s 1-3/4 in. chuck accepts TE-YX SDS Max bits (not included), and it comes supplied with a case for added value and convenience.
The Hiltex 1″ Electric Hammer Drill is a hammering drill with hammer stop switch and drill stop switch for three operating modes to break masonry (hammer/drill), chisel (hammer) and penetrate wood/metal (drill). Capable of penetrating 1-inch (26 MM) of concrete and drilling through steel. The included depth stop prevents overpenetration, damage to tool. Roto-hammer has spring-loaded quick swap chuck that locks instantly using SDS Plus shanks with cross-section shape for security. Hammer drill has rotary handle with fully rotatable auxiliary handle can be secured at any angle for a better grip, increased precision. The 6 foot cord plugs into domestic outlets for more consistent power output than cordless power tools without being limited by battery life. Specifications: – 520 Watts – 110V – 60 Hz – 4.7 Amps – 900 RPM – 3150 BPM – 3/8″ SDS Plus quick-change chuck Includes: – Depth stop – Lubricating oil – Dust cover – Bull point chisel – 3/4″ flat chisel – 5/16″ drill bit – 9/32″ drill bit – 3/8″ drill bit – Hard-plastic case
RTRY HMR 1-3/4 SDS-MAX. The product is easy to use. The product is durable. The product is manufactured in Czech Republic.
The Milwaukee 5426-21 1-3/4 in. SDS-Max Rotary Hammer features a 14 Amp, 1.300 MWO motor that provides optimal power for the toughest conrete drilling and demolition applications. 8.8 ft/lbs of impact energy combined with 450 RPM and 2,840 BPM, this hammer delivers fast drilling and hard hitting performance. Features such as AVS Anti-Vibration System, mechanical clutch, and advanced electronics provide ease of use and overall long-term durability for the user.
DRILL 3/8 2800 MAGNUM. The product is easy to use. The product is durable. The product is manufactured in China.
For day in, day out drilling and driving in wood, steel, or plastic, there might not be a better tool than Milwaukee’s Magnum hole shooter. The aluminum/magnesium alloy on the gear case cuts down on the tool’s weight, and the glass-reinforced nylon handle makes it a bit lighter, too–but let there be no doubt: when it comes to results, this is the same heavy-duty, ridiculously powerful, no-nonsense tool it’s always been. The shooter is built with a stacked design–meaning the drill’s interior parts stack on top of each other–which makes replacing parts (like a switch) much easier to do as the whole drill doesn’t need to be taken apart. The handle is designed so you can hold it two ways–either pistol-grip or with the palm of your hand resting on the top back portion–making the drill an extension of your arm. As a result, you can really get behind it while still easily reaching the trigger with your fingers; the finger slots add comfort. The carbon brushes are easy to access and change. And this model comes with a convenient and reliable all-metal, two-sleeve keyless chuck.
If you’re looking for a serious, long-lasting drill, you can’t go wrong here. Milwaukee’s hole shooter is a very high quality tool that will serve you for years and years and years. –Dori Anvinson
M18 Fuel 1″ Sds Plus Rotary Hammer Kit. The Product is Easy to Use and Easy to Handle. The Product is Highly Durable. Made In China.